SpiderElectron

Electronic Engineering Blog

Enclosure for Galileo

I have designed a partial enclosure for Galileo. Using the STEP files below you can 3D Print it yourself.

I have not had one made yet, so cannot guarantee it’s a good fit, but I’m reasonably confident.

Enclosure

Galileo Partial Enclosure Click for larger image.

 

The STEP files for the enclosure are here.

 

 

 

 

The STEP files for the mockup of the board is available here.

Board Mockup

Mockup of the Galileo board, with external facing components only shown. Click for larger image.

Leave a Reply

%d bloggers like this: